Small unit glass curtain wall component requirements

　　1. The panel and the small unit attachment frame should be bonded with a neutral silicone structural sealant, and the structural adhesive should have good adhesion and compatibility with the small unit attachment frame and panel.

　　2. When the panel and the frame attached to the small unit should be bonded with silicone structural sealant, the adhesive strip directly in contact with the structural adhesive should be a silicone strip.

　　3. The attachment frame of the small unit should be a full-length attachment frame, which can be set on opposite sides or four sides.

　　4. When using a closed or open structure with a rubber strip, the structural glue should not be exposed.

　　5. When the small unit glass curtain wall component with hidden frame is used for the suspended ceiling, safety buckles should be installed on the attached frame of the small unit to prevent the structural adhesive from bearing the shearing force caused by its own weight for a long time. The setting of the safety buckles should comply with the regulations of JGJ 102.

　　6. When the small unit of the glass curtain wall adopts the form of hidden frame, the position of the structural glue for the insulating glass and the position of the structural glue for the bonding of the glass and the frame should be overlapped to prevent the failure of the structural glue when the inner tempered glass is broken. .